Adelco JetForce Return Belt Gas Textile Dryers

Adelco JetForce Return Belt gas textile dryers provide longer curing times without the need to increase oven lengths. Ideal for Kornit direct to garment printers, these dryers return the garment back to the original loading point. JF100-3-RB has a 40” belt while the JF150-3-RB has a 60” belt width, and may be ordered with an optional split belt.

Adelco JetForce gas textile dryers incorporate massive volumes of jet-forced, super-heated air for fast and efficient curing of both plastisol and water based inks. Superior air and heat distribution provide extremely even belt temperatures throughout the oven.

	Single Point Load - Unload Ideal for Kornit direct to garment printers, these dryers return the garment back to the original loading point.
	Return System Doubles Retention Time Unique return system doubles the oven retention time by flipping garment at the end of the oven and running it back through to the loading position.
	Lowest Carbon Footprint JetForce offers the industry’s lowest carbon footprint! By utilizing a UV flame detector rather than old fashion flame rods JetForce achieves the most efficient air/gas combination possible. This time-tested design minimizes gas consumption and maximizes heat output by producing a hotter and cleaner burning “blue flame”.
	JetForce Control System The JetForce control system incorporates digital control and solid state components. The latest intelligent safety control system provides automatic dryer start up and cool down procedures and monitors the most sophisticated safety system available including twin gas pressure safety valves, air flow monitoring and U.V. flame detection.
	Modular Design Increase throughput by 30% without the need for additional gas or electrical consumption. JetForce’s modular design is easily expanded with the addition of one meter “drone” extension oven modules or additional in-feed our out-feed. Unlike competitive systems which simply increase the size of the oven, JetForce connects and feeds heated air directly from the main burner system.
	Crowned Rollers With 4-point tracking adjustments, Adelco JetForce’s highly durable Teflon® coated open mesh belt runs smoothly on crowned rollers driven by a heavy duty gear reduced variable speed DC motor. (pictured on Jetforce Split Belt)
	Easy Access Filter Adelco JetForce has an easy access, slide-out lint filter. No filter replacements required.
	Hot Inside / Cool Outside Exceptionally well insulated, Adelco JetForce retains heat for maximum energy efficiency, keeping the oven exterior and your shop cool. Adjustable oven doors may be raised to accommodate bulky items like sweatshirts or bags, or lowered to conserve heat when printing t-shirts and cut pieces.

Adelco JetForce Return Belt gas textile dryers provide longer curing times without the need to increase oven lengths. Ideal for Kornit direct to garment printers, these dryers return the garment back to the original loading point. JF100-3-RB has a 40” belt while the JF150-3-RB has a 60” belt width, and may be ordered with an optional split belt.

Please select the version of this product that you wish to see the specifications for.

JF100-3RB JF150-3RB JF150-3RB-SB

JF100-3RB
Belt Width	48" (120cm)
In-Feed / Exit Length	48" (120cm)
Oven Length	10' (300cm)
Optional Drone Length	40" (100cm)
Gas Pressure	10" W.G. (25 mbar)
Max. Gas Consumption	165,000 btu
Average Gas Consumption	75,000 btu
Heat-Up Time	10-15 Minutes
Gas Pipe Connection	3/4"
Electrical Supply	208-220v, 3 Phase, X amps
Electrical Consumption	13 amps / phase
Optional IR Preheat	9 KW
Exhaust Duct Diameter	6" (150mm)
Extraction Duct	10" (250cm)
Airflow Volume	7,000cfm

JF150-3RB
Belt Width	60" (150cm)
In-Feed / Exit Length	48" (120cm)
Oven Length	10' (300cm)
Optional Drone Length	40" (100cm)
Gas Pressure	10" W.G. (25 mbar)
Max. Gas Consumption	220,000 btu
Average Gas Consumption	100,000 btu
Heat-Up Time	10-15 Minutes
Gas Pipe Connection	3/4"
Electrical Supply	208-220v, 3 Phase, X amps
Electrical Consumption	13 amps / phase
Optional IR Preheat	12 KW
Exhaust Duct Diameter	6" (150mm)
Extraction Duct	10" (250cm)
Airflow Volume	9,000cfm

JF150-3RB-SB
Belt Width	2 Each 27"
In-Feed / Exit Length	48" (120cm)
Oven Length	10' (300cm)
Optional Drone Length	40" (100cm)
Gas Pressure	10" W.G. (25 mbar)
Max. Gas Consumption	220,000 btu
Average Gas Consumption	100,000 btu
Heat-Up Time	10-15 Minutes
Gas Pipe Connection	3/4"
Electrical Supply	208-220v, 3 Phase, X amps
Electrical Consumption	13 amps / phase
Optional IR Preheat	12 KW
Exhaust Duct Diameter	6" (150mm)
Extraction Duct	10" (250cm)
Airflow Volume	9,000cfm

Additional Oven Drone Option
Increase throughput by 30% without the need for additional gas or electrical consumption. JetForce’s modular design is easily expanded with the addition of one meter “drone” extension oven modules or additional in-feed our out-feed. Unlike competitive systems which simply increase the size of the oven, JetForce connects and feeds heated air directly from the main burner system.

Split Belt Option
Otpional Split Belt includes two belts each with its own motor and speed control for curing two different types of jobs at once. Set one side with a fast belt speed and shorter retention for curing of plastisol on light garments, and set the other side with a slow belt speed and longer retention time for waterbased ink on dark garments. Option available only at time of orignial order.