Call Toll Free (800) 394-4426

> Education Resources > FAQs > Technical Service > If I stop sewing in the middle

If I stop sewing in the middle of a design and need to start over, how do I get back to the center of the hoop (starting point) and begin the design over or start a new one?
This is a two step process:
1. Go to D button screen 3 this is manual origin return, turn the dash to a circle hit SET and the frame will move to the starting point of the design.
2. Now you can either reload from memory the design you were sewing or you may load a new design from a disk and start over.

NEO:
1. Press the P Origin button
2. The machine will ask if you want to cancel the embroidery
3. Press SET for yes the machine will move the frame back and put you at stitch zero on that design.